Installation & Fitting

5 inch diameter x 0.25m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

5 inch diameter male-female t piece in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

5 inch diameter x 0.5m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

5 inch diameter x 1m length flue pipe with door in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

5 inch diameter x 0.12m male-male fitting in a matt black finish is suitable for use with stoves Learn More

5 inch diameter 90° elbow in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

5 inch pipe holder in a painted stainless steel finish is used to secure the flue pipe to the inside wall of the chimney. Learn More

5 inch diameter x 0.25m length flue pipe with flue damper in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

5 inch diameter x 0.5m length flue pipe with door in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

5 inch diameter x 1m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

5 inch diameter 90° elbow with inspection door in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

5 inch diameter 45° elbow in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

Vitcas outdoor oven cement for jointing with firebricks in pizza, bread, BBQ's smokehouses, fire pits and other high temperature applications. It is a hydraulic set mortar which is non soluble and resistant to rain and frost. Learn More

Vitcas outdoor oven cement for jointing with firebricks in pizza, bread, BBQ's smokehouses, fire pits and other high temperature applications. It is a hydraulic set mortar which is non soluble and resistant to rain and frost. Learn More

Vitset 45 refractory mortar - 1700 ready mixed. Used for trowelling, patching and setting refractory and insulation firebricks of all grades rating higher than 1400 degrees Celsius, plus ceramic boards and blankets. Learn More

Vitset 45 refractory mortar - 1700 ready mixed. Used for trowelling, patching and setting refractory and insulation firebricks of all grades rating higher than 1400 degrees Celsius, plus ceramic boards and blankets. Learn More

Vitcas Refractory Mortar- Vitset 80 is a ready mixed, ready-to-use, high alumina, heat resistant cement. It is air setting and is suitable to use in setting, dipping, coating and spraying refractory bricks. Learn More

Vitcas Refractory Mortar- Vitset 90. A ready mixed, high alumina content cement for use in setting pre-cast shapes of wood fired pizza ovens, setting sliding gate plates and other industrial applications. Learn More

VITCAS Silicas A - Air Setting Ready Mixed Refractory Mortar. High temperature resistance to 1400 degrees. Learn More

BLACK Fire Cement formulated specifically for patching and repairs to firebricks, fireplaces, solid fuel ovens and boilers. Resistant to 1250 degrees Learn More

VITCAS Flue Cement is a high temperature ready mixed fireproof mortar paste. Learn More

BLACK Fire Cement formulated specifically for patching and repairs to firebricks, fireplaces, solid fuel ovens and boilers. Resistant to 1250 degrees Learn More

VITCAS Silicas M - Air Setting Ready Mixed Refractory Mortar for lightweight firebricks and insulation materials up to 1425 degrees. It is a white refractory mortar so may be used where white mortar is needed for visual and aesthetic purposes. Learn More

VITCAS Heat Resistant White Tile Grout. For grouting tiles which have been fixed with VITCAS Heat Resistant Tile Adhesive. Learn More

VITCAS Heat Resistant Grey Tile Grout. For grouting tiles which have been fixed with VITCAS Heat Resistant Tile Adhesive. Learn More

Fire proof Render is for rendering brick, stone, concrete and breeze block fireplaces. Fireplace render is used as a base coat for the Vitcas Heat resistant plaster finish coat. Learn More

BLACK Fire Cement formulated specifically for patching and repairs to firebricks, fireplaces, solid fuel ovens and boilers. Resistant to 1250 degrees Learn More

Fire proof screed is a cement like product resistant to 1400 degrees Celsius. Its purpose is for screeding masonry and making replacement fire brick for fireplaces, barbeques and kilns. Learn More

Vitcas vermiculite insulating cement I a non combustible, pre mixed lightweight aggregate cement mix. Used for backing insulation and non structural infill. Learn More

Vitcas vermiculite insulating cement I a non combustible, pre mixed lightweight aggregate cement mix. Used for backing insulation and non structural infill. Learn More

Vitcas Fire Cement-Ready Mixed Rated to 1250 degrees. For patching and repair fire bricks, fireplaces, solid fuel ovens, range cookers, boilers and central heating systems. Learn More

300ml cartridge of black KOS fire cement. Learn More

Heatproof Plaster. High temperature smooth finish. Learn More

Vitcas Premium Fire Resistant Cement is able to withstand very high temperatures reaching up to??1250 degrees. The premium fire cement has a putty-like consistency which hardens at high temperatures. Learn More

BLACK Fire Cement formulated specifically for patching and repairs to firebricks, fireplaces, solid fuel ovens and boilers. Resistant to 1250 degrees Learn More

Vitcas Fire Cement-Ready Mixed Rated to 1250 degrees. For patching and repair fire bricks, fireplaces, solid fuel ovens, range cookers, boilers and central heating systems. Learn More

Vitcas Fire Cement-Ready Mixed Rated to 1250 degrees. For patching and repair fire bricks, fireplaces, solid fuel ovens, range cookers, boilers and central heating systems. Learn More

Vitcas Fire Cement-Ready Mixed Rated to 1250 degrees. For patching and repair fire bricks, fireplaces, solid fuel ovens, range cookers, boilers and central heating systems. Learn More

VITCAS Silicas M - Air Setting Ready Mixed Refractory Mortar for lightweight firebricks and insulation materials up to 1425 degrees. It is a white refractory mortar so may be used where white mortar is needed for visual and aesthetic purposes. Learn More

Premium T Fire Cement is used for repairing special parts inside fish and chip frying rangers, kebab cookers, etc. found in fast food and takeaway places. Learn More

Fire proof screed is a cement like product resistant to 1400 degrees Celsius. Its purpose is for screeding masonry and making replacement fire brick for fireplaces, barbeques and kilns. Learn More

Vitcas heatproof mortar is an air setting refractory cement for INDOOR applications. Rated for use up to 1400 degrees Celsius this ready mixed cement has good adhesion and achieves smoke and gas tight joints. Learn More

Fire proof Render is for rendering brick, stone, concrete and breeze block fireplaces. Fireplace render is used as a base coat for the Vitcas Heat resistant plaster finish coat. Learn More

Heatproof Plaster. High temperature smooth finish. Learn More

6 inch pipe holder in a painted stainless steel finish is used to secure the flue pipe to the inside wall of the chimney. Learn More

6 inch diameter x 1m length flue pipe with door in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

6 inch diameter x 0.25m length flue pipe with flue damper in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

6 inch diameter male-female t piece in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

6 inch diameter x 0.25m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

6 inch diameter x 0.5m length flue pipe with door in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

6 inch diameter x 1m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

6 inch diameter x 0.5m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

6 inch diameter 45° elbow in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

6 inch diameter 90° elbow in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

6 inch diameter 90° elbow with inspection door in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

6 inch diameter x 0.12m male-male fitting in a matt black finish is suitable for use with stoves Learn More

18'' matt black smoke hood used for open solid fuel fires. Learn More

16'' stainless steel smoke hood used for open solid fuel fires. Learn More

18'' brass smoke hood used for open solid fuel fires. Learn More

16'' brass smoke hood used for open solid fuel fires. Learn More

18'' stainless steel smoke hood used for open solid fuel fires. Learn More

16'' matt black smoke hood used for open solid fuel fires. Learn More

This cowl is fitted to the top of a standard 8'' clay chimney pot and ensures that birds cannot nest on the chimney whilst also ensuring the exit of the flues gases is not impeded. Learn More

The jackdaw chimney cowl is designed specifically for preventing birds from perching or nesting on top or in between your chimney pot. This jackdaw chimney cowl fits chimney pots of between 6inch and 11inch. Learn More

Colt tops are very efficient as their rounded shape creates lift whichever direction the wind is blowing, eliminating downdraught. Rain drains help divert water outside the chimney pot.

Colt tops are available in gas and all purpose models. The colt top all purpose (brown) is the same as the colt top gas (aluminium), but additionally has a painted finish which is highly resistant to corrosive fuels such as coalite, furan cite and anthracite. Learn More

Colt tops are very efficient as their rounded shape creates lift whichever direction the wind is blowing, eliminating downdraught. Rain drains help divert water outside the chimney pot.

Colt tops are available in gas and all purpose models. The colt top all purpose (brown) is the same as the colt top gas (aluminium), but additionally has a painted finish which is highly resistant to corrosive fuels such as coalite, furan cite and anthracite.

Learn More

Comes with guard. Learn More

The high top is designed to prevent unwanted bird and animal entry and to reduce the potential for clogging by soot or debris

The high top has quickly become a favourite bird guard, Fits flues 125-250mm.

Learn More

The new colt top 2 is a static gas only anti-down draught chimney cowl manufactured by colt cowls, market leaders since 1930. The cowl uses proven technology to provide solutions to down draught problems as well as being the professionals' choice when fitting chimney terminals in new build or refurbishment. Fits all flue sizes 125-250mm. Learn More

The new colt top 2 is a static multi fuel anti-down draught chimney cowl manufactured by colt cowls, market leaders since 1930. The cowl uses proven technology to provide solutions to down draught problems as well as being the professionals' choice when fitting chimney terminals in new build or refurbishment. Fits all flue sizes 125-250mm. Learn More

The rotorvent chimney cowl is designed to prevent down draught in chimneys. With its durable stainless steel construction and rigid spindle design this chimney cowl stops down-draught from the chimney or can be used as a ventilator.

Please note this is an anti-downdraught cowl, it solves the problem of air outside blowing down your chimney and causing a draught in the room when the fire is not lit. It does not solve the problem of smoke coming back into the room. If you have this problem we recommend getting professional advice from a chimney specialist.

Learn More

7 inch diameter x 0.12m male-male fitting in a matt black finish is suitable for use with stoves Learn More

7 inch diameter 45° elbow in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

7 inch diameter 90° elbow with inspection door in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

7 inch diameter 90°elbow in a vitreous enamelled - matt black finish is suitable for use with stoves

Learn More

7 inch diameter x 1m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

7 inch diameter male-female t piece in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

7 inch pipe holder in a painted stainless steel finish is used to secure the flue pipe to the inside wall of the chimney. Learn More

7 inch diameter x 0.25m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

7 inch diameter x 0.25m length flue pipe with flue damper in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

7 inch diameter x 0.5m length flue pipe in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

7 inch diameter x 1m length flue pipe with door in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More

7 inch diameter x 0.5m length flue pipe with door in a vitreous enamelled - matt black finish is suitable for use with stoves Learn More